Enquiry Form

REDUCE YOUR HEATING COSTS

AND SAVE <span>ENERGY</span> WITH INSLIU INNOVATIONS SPRAY INSULATION

AND SAVE ENERGY WITH INSLIU INNOVATIONS SPRAY INSULATION

IPM OP SERIES Transfer pump

IPM OP SERIES Transfer pump

IPM's OP232C is designed specifically for difficult to handle materials. The immersed lower pump, tie-tubes, and quick release bung bushing allow quick drum change without exposing the system to contamination and moisture. 


New designs for:
  • Higher viscosities
  • Ease of cleaning
  • Fluids with 245a agent
  • Low ceiling installations
  • Interchangeable pump lengths



New design innovations to simplify handling and application of polyurethane, polyurea, and other two component materials.



New OP232CD designed for use in low ceiling applications

  • Swapping out 55 gallon drums in low ceiling areas such as trailers are no longer a problem. 
  • Reduced pump diameter allows heights as little as 78"



New design for cleanable tubes

  • Allows thorough cleaning of the pump fluid tubes
  • Both the IP-02 and the OP series have easily cleanable fluid tubes.
  • Feature allows for nearly an unlimited number of pump rebuilds.



IP and OP Series Pumps now have high viscosity "B" resin capabilities

  • "B" resins with the newer 245fa blowing agent can have viscosities up to 2000cPs
  • OP and IP series pumps have increased suction capability by 69%
  • Pumps have the capability of pumping new "B" resins without heat or pressurization
  • The new design nearly eliminates foaming of the material
  • Outlet ports are now a standard 3/4" NPT